XRD, TGA and TMA Charts (No.197)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
197SFD3_04AMarch 26,1981Fukami V.FukamiShin-ei TohsekiStock yardThird grade A

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
75.7675.2366.3856.2586.744.1315.3479.31

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
79.4814.540.460.030.060.070.040.604.35


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
58.279.1731.770.500.290.00


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
5.064.1667.4664.4554.6446.3180.289.5015.8472.98


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
45.75.7515761583157916502955.6656.8764.4954.6575.41-0.222.0975.32
Back to the list of vein or depositBack to the list of grade or sort