XRD, TGA and TMA Charts (No.194)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
194SFD1_01AMarch 26,1981Fukami V.FukamiShin-ei TohsekiStock yardFirst grade

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
81.8981.7179.0566.9990.393.5211.4384.66

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
79.8114.640.270.130.050.070.030.334.40


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
65.270.0134.160.500.000.06


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
4.904.2273.2171.1367.8957.5384.347.3511.3179.33


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
46.05.11160016001596165329+67.9569.6879.7667.5983.47-0.781.7883.36
Back to the list of vein or depositBack to the list of grade or sort