XRD, TGA and TMA Charts (No.181)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
181HFI3_12AMarch 26,1981Fukami V.FukamiHisatsune TohsekiDressing plantThird grade, for insulator

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
74.8674.1266.2356.1386.094.5514.6579.29

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
77.3714.920.640.040.100.060.342.153.99


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
47.0227.6524.700.610.000.02


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
4.643.7966.0363.2356.2747.6979.529.0713.7173.74


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
43.58.4314751480147716112750.7151.7255.9147.3871.920.014.2571.60
Back to the list of vein or depositBack to the list of grade or sort