XRD, TGA and TMA Charts (No.178)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
178HFIN_08AMarch 26,1981Fukami V.FukamiHisatsune TohsekiInside drift / left / third working faceFault clay

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
76.6676.3066.2256.1287.353.7916.2079.10

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
78.9414.540.680.030.080.080.080.764.40


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
54.102.0143.280.500.000.11


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
5.074.1965.6462.1852.2344.2678.8510.5915.9371.49


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
44.66.30153415471544164129-49.8050.7455.6147.1371.230.143.5871.01
Back to the list of vein or depositBack to the list of grade or sort