XRD, TGA and TMA Charts (No.131)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
131KKN3_04ANovember 15,1983Kaigan V.NiiyamaKiyama TohsekiOpen cutThird grade, SK26-27

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
79.4479.1875.2363.7588.983.6412.1683.19

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
78.8714.830.600.020.030.110.032.123.19


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
61.6015.9521.161.090.080.12


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
3.573.0371.8869.4065.5555.5583.318.2311.6678.04


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
45.57.30146014671463160227-64.3765.8273.7062.4681.13-0.352.9380.90
Back to the list of vein or depositBack to the list of grade or sort