XRD, TGA and TMA Charts (No.154)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
154KGY3_15ADecember 1,1980Murayama V.UchiyamaKyoritsu YogyoMiddle working face= KGY3_03S ?, Third grade

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
75.4175.3961.2851.9386.833.0818.9376.73

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
77.9315.170.550.020.070.080.092.902.86


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
63.2118.7816.261.030.720.00


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
3.452.6966.3561.8248.5841.1778.6313.0418.4068.93


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
50.26.93145614671460160027-65.2766.4372.8061.6981.500.314.1081.05
Back to the list of vein or depositBack to the list of grade or sort