XRD, TGA and TMA Charts (No.153)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
153KGYS_14ADecember 1,1980Murayama V.UchiyamaKyoritsu YogyoLower working face= KGY__02S ?, deep Shima (stripes)

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
62.2461.4648.0240.6978.404.5218.5671.16

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
75.6315.111.010.020.280.141.433.392.57


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
43.9729.2212.2713.890.500.15


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
3.292.3659.1054.5539.3533.3573.8613.5820.1164.33


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
40.06.73132313331333148717+51.5752.2753.0244.9372.300.807.1371.38
Back to the list of vein or depositBack to the list of grade or sort