XRD, TGA and TMA Charts (No.143)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
143KGY3_03SDecember 1,1980Murayama V.UchiyamaKyoritsu YogyoMiddle working faceThird grade

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
66.9166.3753.2745.1481.474.0318.2673.67

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
78.4314.570.760.020.000.130.072.952.78


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
57.9624.5815.921.500.000.04


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
3.312.5759.9055.3743.0136.4574.4113.4717.8266.03


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
49.18.0614361444143715852654.8256.2260.6551.4074.98-0.714.5374.56
Back to the list of vein or depositBack to the list of grade or sort