XRD, TGA and TMA Charts (No.070)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
070UST__04AMarch 30, 1982Sarayama V.ToboshiUeda Tohseki??

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
79.9479.8177.9366.0489.343.3910.8284.44

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
77.6615.260.470.010.070.160.093.062.66


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
56.1635.047.141.210.320.13


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
3.572.4977.0875.6874.4563.0986.995.9210.1682.47


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
43.77.66140314201417156926-67.6369.1775.5264.0083.17-0.394.3882.60
Back to the list of vein or depositBack to the list of grade or sort