XRD, TGA and TMA Charts (No.052)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
052USIH_13ANovember 15, 1983Sarayama V.IguchiyamaUeda TohsekiSecond levelRaw material of Amakusa clay ?, Henshoku (discoloration)

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
83.6684.3786.2673.1091.851.848.6288.00

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
77.0615.750.400.010.060.180.093.472.55


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
56.9030.6011.131.170.000.19


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
3.242.4282.3083.6087.0573.7791.430.667.5688.56


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
45.07.1514261439143515832671.1472.8080.4968.2185.32-0.493.7984.83
Back to the list of vein or depositBack to the list of grade or sort