XRD, TGA and TMA Charts (No.043)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
043USI3_03SMarch 29,1980Sarayama V.IguchiyamaUeda Tohseki?Third grade

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
76.1976.6068.0557.6787.522.2315.1780.23

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
80.9513.110.460.010.050.100.102.902.08


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
62.3626.879.421.360.000.00


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
2.451.9471.7569.2962.1752.6983.248.1913.9976.69


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
48.99.12143914471441158726+62.7964.1570.3159.5880.09-0.234.0279.69
Back to the list of vein or depositBack to the list of grade or sort