XRD, TGA and TMA Charts (No.012)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
012USGN_13AJune 11,1981Sarayama V.GohtsuUeda TohsekiFault belt upper in the driftClay

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
75.8576.2871.4860.5887.342.1812.6182.00

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
79.3614.500.510.010.110.140.081.763.18


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
64.2510.1724.810.760.000.00


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
3.753.0269.9667.4662.4952.9682.138.3112.3876.73


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
46.36.74147414871482161427+64.9366.1274.2662.9381.310.232.7781.11
Back to the list of vein or depositBack to the list of grade or sort