XRD, TGA and TMA Charts (No.141)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
141KGY__01SDecember 1,1980Murayama V.UchiyamaKyoritsu YogyoLower drift / lower working faceRaw material for acid treatment

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
67.5866.8353.8445.6381.754.5018.1873.85

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
75.9614.930.820.020.090.072.933.551.44


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
41.4227.522.9228.140.000.00


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
1.821.3061.6057.2842.1535.7275.6812.8419.9666.02


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
51.311.0127612841276141514+43.1042.3839.0433.0865.104.2510.0163.44
Back to the list of vein or depositBack to the list of grade or sort