XRD, TGA and TMA Charts (No.135)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
135RTT__01AMarch 29,1980Tanosako V.TanosakoReihoku TohsekiIn the factory of acid treatmentRaw material ?

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
71.6571.2971.5860.6684.433.728.8481.72

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
77.0414.711.440.050.110.260.122.363.65


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
53.8129.6214.781.020.060.71


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
4.143.4456.5855.1357.3548.6074.256.086.1872.83


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
43.96.2313411347134414991853.7354.9755.5447.0774.14-0.397.4873.08
42.05.6414261432143115802641.0042.0944.4137.6464.88-0.734.8364.54
Back to the list of vein or depositBack to the list of grade or sort