XRD, TGA and TMA Charts (No.111)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
111KRT__02ANovember 13,1982Tomioka D.ShiroiwasakiKiyama TohsekiShiroiwasakiGood quality,
SK14-18

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
79.9880.3186.6473.4289.622.485.4188.03

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
74.6415.170.520.040.130.323.934.111.08


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
36.7132.420.7629.600.000.51


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
1.231.0374.3573.8271.6160.6985.924.1110.7381.83


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
45.19.2112591294129014351557.4558.9060.5951.3576.75-0.696.9175.73
Back to the list of vein or depositBack to the list of grade or sort