XRD, TGA and TMA Charts (No.028)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
028USD*_09AJuly 16, 1980Sarayama V.DenbeekobaUeda TohsekiUpper base / upperRaw material for acid treatment (SK26)

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
74.4673.8256.4747.8685.924.3421.1774.20

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
76.9915.130.490.010.100.120.823.262.57


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
47.8237.1114.440.530.000.11


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
3.402.3673.1971.4263.0153.4084.516.7014.9577.45


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
44.46.10144014541451159426+63.2164.6872.4361.3880.42-0.452.9080.21
Back to the list of vein or depositBack to the list of grade or sort