XRD, TGA and TMA Charts (No.006)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
006USGTA06AJuly 16, 1980Sarayama V.GohtsuUeda TohsekiUpper level-rightAlbite (+) SK14-16

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
65.6565.2853.7745.5780.803.6517.1074.03

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
79.2914.390.770.010.070.090.091.893.10


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
59.2118.0721.730.670.110.20


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
3.572.8757.7054.1045.7438.7673.5511.3114.6267.73


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
47.46.60147514871482161327+57.4058.6163.9954.2376.56-0.144.0376.21
Back to the list of vein or depositBack to the list of grade or sort