XRD, TGA and TMA Charts (No.004)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
004USGTA04SMarch 29, 1980Sarayama V.GohtsuUeda TohsekiNorthLow grade; Albite (+)

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
63.3362.9053.3545.2179.313.745.6373.80

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
74.7814.760.760.011.010.043.073.152.20


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
41.6316.505.6634.411.800.00


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
2.532.0360.2156.8946.1439.1075.4310.5016.5368.58


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
53.39.51124512571247137513-52.0252.7252.2944.3172.610.828.1371.42
Back to the list of vein or depositBack to the list of grade or sort