XRD, TGA and TMA Charts (No.002)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
002USGTA02AMarch 29, 1980Sarayama V.GohtsuUeda TohsekiNorthLow grade; Albite (+)

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
62.3660.0047.0939.9177.468.1518.1869.92

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
75.9915.040.740.010.020.052.742.962.09


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
40.2432.334.4122.910.000.11


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
2.601.7167.4263.6348.7941.3579.7711.2719.5769.68


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
52.57.42133813461337149118-53.1454.3955.2746.8473.75-0.447.1972.78
Back to the list of vein or depositBack to the list of grade or sort