XRD, TGA and TMA Charts (No.001)

No.NameSampling dateVein or depositMining placeMining companySampling placeGrade or sort
001USGTA01AMarch 29, 1980Sarayama V.GohtsuUeda TohsekiNorthLow grade; Albite (+)

Colors of the milled samples
XYZWhiteness (Hunter)LabWhiteness (Lab)
64.8064.6654.9246.5480.413.1315.7974.64

Chemical compositions (wt%)
SiO2Al2O3Fe2O3TiO2CaOMgONa2OK2OIg.loss
75.4515.210.860.010.050.093.133.191.76


Mineral compositions (wt%)
Q : QuartzM : SericiteK : Kaolin mineralF : FeldsparC : CalciteS : Siderite
39.4627.556.3426.650.000.00


Results of TGA and Colors of the Powder Samples after Measuring
The conditions for TGA were sample weight : about 180mg, heating rate : 20°C/min, ended temperature : 1000°C.
LT : Total weight loss, L400 : Weight loss of 400-1000°C.
LT (wt%)L400 (wt%)XYZWhiteness (Hunter)LabWhiteness (Lab)
2.161.5263.9360.6549.6342.0677.8810.2416.7370.43


Results of TMA and Colors of the Sintered Samples after Measuring
The conditions for TMA were compaction pressure : 250MPa, pellet diameter : 10mm, thickness : about 3mm, heating rate : 10°C/min, loading : 10g.
W10 : Contents of particles larger than 10µm, SMax : Maximum shrinkage, T0 : Temperature at the maximum shrinkage, T5 : Temperature at the expansion coefficient becomes 0.0005/°C, TS5 : Temperature rectified using the correlative equation, TSK : Nominal temperature equivalent to its SK.
W10
(wt%)
SMax
(%)
T0
(°C)
T5
(°C)
TS5
(°C)
TSK
(°C)
SKXYZW
(Hunter)
LabW
(Lab)
43.77.6012641276127314121446.8546.9546.2539.1968.522.147.9467.46
Back to the list of vein or depositBack to the list of grade or sort